Cleaning, Operation & monitoring of sticker labeling machine
PURPOSE: To lay down the procedure for cleaning, operation & monitoring of sticker labeling machine.
SCOPE : This SOP is applicable for cleaning, operation & monitoring of sticker labeling machine at WFI manufacturing facility
REFERENCE(S) & ATTACHMENTS:
References
Sticker labeling machine user manual
RESPONSIBILITY:
Production Person:
To verify that employees are trained before performing or operation any task relevant to this SOP.
To Maintained the record.
Production Head:
To ensure the compliance of SOP.
Quality Assurance Persons:
To verify that all the instructions are followed properly as per the given SOP.
To ensure implement of the SOP.
Abbreviations
C.C. No. : Change Control Number
SS : Stainless Steel.
IPA : Iso Propyl Alcohol
PROCEDURE:
Cleaning
Remove all the rejected ampoules, labels from the machine.
Clean the conveyer & S.S outer body of machine with IPA 70% solution.
Clean the control panel of machine with dry lint free cloth.
Cleaning should be done at start & end of operation/shift & at the time of changeover /change in B. No.
Operation
Switch “ON” the power supply of labeling machine.
switch “ON” the control panel of labelling machine.
Set the machine with required labelling roll.
Arrange the roll on the labeling machine as per flow diagram on dispenser body.
Adjust the release plate with nylon brush as per the Ampoule cassettes
Press “MAN” button on the control panel & then press “INCHING” to adjust the label as
per the label sensor.
Press again “MAN” button to auto detect the label length.
Press the “ENT” button to adjust the label speed.
After adjustment of label roll press “START” on the control panel & conveyer belt will start running.
Now press “RUN” to start the label dispenser, then arrange the ampoule cassettes on the conveyer belt of labeling machine and start labeling and on line counting of label will show on the screen of control panel.
Adjust the label up and down on the cassettes by pressing “ENT” & followed by pressing “LABEL GAP”.
Continuous run the labeling machine. After finish the one label roll, stop the machine & arrange another label roll & reset the counter with by pressing “TOG” key on the control panel & repeat the same process to run the machine.
After completion of labeling/end of batch, press “ESC” key to stop the labeling & then press “STOP” key to stop the conveyer of the machine.
Check the counter on the panel & remove the remaining label roll from the machine & Clean the machine for next batch.
Attach one label in BPR from each label roll & checked by production person & QA person for text matter & give sign with date & time
Make entry of labeling machine operation as per format No. with current version.
REVISION HISTORY